Specialists in Led Traffic Lights
LED traffic lights for urban roads, pedestrian crossings and traffic lights for trams, complying with international standards and norms.
We lead the traffic lights market.
Traffic light manufacturers and distributors with more than 20 years of experience
We have EAC Certification (Russia, Belarus and Kazakhstan)
Indicates that the products comply with all technical regulations and have passed all conformity assessment procedures of the Eurasian Customs Union.
Subcategories: Body Traffic Lights – Optics Traffic Lights – Solar Traffic Lights – Traffic Lights Tram – Buttons Traffic Lights
Traffic Light Body
Traffic Light Body 200mm
200 mm system for use in the traffic lights including LED lamps that provide high brightness high visibility.
The disappearance of Ghost Effect caused by the incidence of sun light on the glass is achieved.
Light body can be supplied with an incandescent lamp, LED system or just the single body.
FEATURES traffic lights body 100mm, 200mm
Material: Polycarbonate.
Colors: Yellow, Gray, Green, Black and combinations thereof.
- High Impact resistence.
- Working temperature from -40 ° C to 74° C.
- Anti-rotating positioning within intermodulation.
- Easy lamp replacement and axial adjustment of the light source.
- Excellent dielectric characteristics. Closing pressure ‘CUC’ with optional coupling screws.
- Rotationally adjustable visor.
More information – Traffic Light Body for 200mm Optics
LEDs in our traffic lights
The diode LED is the basic element forming the panels. The type of LED that is used corresponds to a first firm optoelectronics manufacturers.
LED technology is used AlInGaP for red and amber colors and InGaN for the green.
Feeding the diode never exceeds the standard specified in the technical specifications. Supplied by the manufacturers.
The use of LEDs involves a series of advantages over the lamps, such as:
– Lower consumption: Due to the characteristics of LED technology, consumption is reduced by more than 75% over the lamps.
– Increased reliability: The life of the lamps currently used is approximately 20,000 hours of life of the LEDs.
This document contains the technical specification of standard electronic lights for traffic lights.
Cover all the requirements of the European standard (EN 12368).
They have an IP Protection degree IP66 and are guaranteed for 5 years to the end user. Compatibility with electronic traffic controllers is guaranteed.
Technical specification
- Sizes:
- 200mm and 300mm.
- Power supply:
- 80V versions 250V AC, 50Hz and 12V DC.
- Safety stabilized and protected from UV radiation.
- Protection against spikes and transients in the power supply.
- Built-in fuse.
- Operating Temperature: -40ºC to +74ºC.
- With temperature compensation.
- Protection: IP66.
- Factor > than 0.9 power.
- Less than 12W consumption.
- Red and Amber: 9W to 12W.
- Green: 10W to 12W.
- Dominant Wavelength:
- Red: >-618nm.
- Amber: 586nm to 596nm.
- Green: 490nm to 510nm.
- Number of LEDs lights 200mm:
- Red: 120.
- Amber: 120.
- Green: 120.
- Number of LEDs lights 300mm:
- Red: 248.
- Amber: 248.
- Green: 128.
- Loss of brightness due to the failure of a light point: <5%.
- Warranty: Failure of a point of light: 5 years.
Led Traffic Light Optics
Light unit:
Red 200mm
Outside Diameter: 215mm | (200mm ± 10% according to regulations).
Led Number: 91.
Materials used in the enclosure
Lens: Flat lens transparent polycarbonate with matt external face to avoid glare and reflections. Anti-vandal and extra protection against UV rays.
Board: Solid Polymer EP501.
Housing: ABS.
Gland: Polyamide.
Cable insulation: PVC.
Electrical characteristics
Vn: 230VaC | 42Vac.
In: 40mA | 220mA.
Frequency: 50/60 HZ.
F.P.: >0,9.
Power: 9W.
Reference: 200R220 | 200R42
Optical characteristics
Light intensity distribution: W (wide beam EN12368 / 2008).
Illuminance (reference axis) 379,5 cd.
Ghosting: Class 5.
Color led: 625 nm (wavelength).
According to European standard EN12368/2008
Light unit:
Green 200mm
Outside Diameter: 215mm | (200mm ± 10% according to regulations).
Led Number: 91.
Materials used in the enclosure
Lens: Flat lens transparent polycarbonate with matt external face to avoid glare and reflections. Anti-vandal and extra protection against UV rays.
Board: Solid Polymer EP501.
Housing: ABS.
Gland: Polyamide.
Cable insulation: PVC.
Electrical characteristics
Vn: 230VaC | 42Vac.
In: 50mA | 275mA.
Frequency: 50/60 HZ.
F.P.: >0,9.
Power: 11W.
Reference: 200V220SJA | 200V42SJA
Optical characteristics
Light intensity distribution: W (wide beam EN12368 / 2008).
Illuminance (reference axis) 552.3 cd.
Ghosting: Class 5.
Color led: 505 nm (wavelength).
According to European standard EN12368/2008
Light unit:
Amber 200mm
Outside Diameter: 215mm | (200mm ± 10% according to regulations).
Led Number: 91.
Materials used in the enclosure
Lens: Flat lens transparent polycarbonate with matt external face to avoid glare and reflections. Anti-vandal and extra protection against UV rays.
Board: Solid Polymer EP501.
Housing: ABS.
Gland: Polyamide.
Cable insulation: PVC.
Electrical characteristics
Vn: 230VaC | 42Vac.
In: 40mA | 220mA.
Frequency: 50/60 HZ.
F.P.: >0,9.
Power: 9W.
Reference: 200A220SJA | 200A42SJA
Optical characteristics
Light intensity distribution: W (wide beam EN12368 / 2008).
Illuminance (reference axis) 460.5 cd.
Ghosting: Class 5.
Color led: 590 nm (wavelength).
According to European standard EN12368/2008
Light unit:
Red Led High Flux Traffic Light 200mm
( Optional Square & Pictogram)
Diameter: 209mm (200mm ± 10% according to norm)
Nº de leds: 7 x High Output.
MATERIAL
Diameter: 209mm (200mm ± 10% according to norm)
Lens: Fresnel Double Lens and Policarbonate UV, High impact resistance.
Rubber gasket: Solid Polimer EP501
Housing: ABS
Gland:: Polimer
IP Protection: IP68
Optic Charateristics
Led Number: 7 x High Output
Distribution: W ( EN12368)
Light Intensity: >400 cd
Ghost Effect: Class 5
Led Color: 625nm (wavelenght)
Electrical Charateristics
Reference: ML-HF-200V220
Frecuency: 50/60Hz
Power: ~8W
Voltage: 230Vac
In 33mA
F.P. >0,9
Working Temperature: -20°C ~ +70°C
According to: EN12368/2015
Light unit:
Green Led High Flux Traffic Light 200mm
( Optional Square & Pictogram)
Diameter: 209mm (200mm ± 10% according to norm)
Nº de leds: 7 x High Output.
MATERIAL
Diameter: 209mm (200mm ± 10% according to norm)
Lens: Fresnel Double Lens and Policarbonate UV, High impact resistance.
Rubber gasket: Solid Polimer EP501
Housing: ABS
Gland:: Polimer
IP Protection: IP68
Optic Charateristics
Led Number: 7 x High Output
Distribution: W ( EN12368)
Light Intensity: >400 cd
Ghost Effect: Class 5
Led Color: 505nm (wavelenght)
Electrical Charateristics
Reference: ML-HF-200V220
Frecuency: 50/60Hz
Power: ~8W
Voltage: 230Vac
In 33mA
F.P. >0,9
Working Temperature: -20°C ~ +70°C
According to: EN12368/2015
Unidad luminosa:
Amber Led High Flux Traffic Light 200mm
( Optional Square & Pictogram)
Diameter: 209mm (200mm ± 10% according to norm)
Nº de leds: 7 x High Output.
MATERIAL
Diameter: 209mm (200mm ± 10% according to norm)
Lens: Fresnel Double Lens and Policarbonate UV, High impact resistance.
Rubber gasket: Solid Polimer EP501
Housing: ABS
Gland:: Polimer
IP Protection: IP68
Optic Charateristics
Led Number: 7 x High Output
Distribution: W ( EN12368)
Light Intensity: >400 cd
Ghost Effect: Class 5
Led Color: 590nm (wavelenght)
Electrical Charateristics
Reference: ML-HF-200V220
Frecuency: 50/60Hz
Power: ~8W
Voltage: 230Vac
In 33mA
F.P. >0,9
Working Temperature: -20°C ~ +70°C
According to: EN12368/2015
Pedestrian Optics Traffic Light Led
Light unit:
Red pedestrian
Outside Diameter: 215mm | (200mm ± 10% according to regulations).
Materials used in the enclosure
Lens: Flat lens transparent polycarbonate with protection against UV rays. Impact resistance IR3.
Board: Solid Polymer EP501.
Housing: ABS.
Gland: Polyamide.
Cable insulation: PVC.
Electrical characteristics
Vn: 230VaC | 42Vac.
In: 30mA | 150mA.
Frequency: 50/60 HZ.
F.P.: >0,9.
Power: 6W.
Optical characteristics
Light intensity distribution: W (wide beam EN12368/2008).
Illuminance (reference axis): 4000mcd.
Color led: 625nm.
According to European standard EN12368 / 2008
Light unit:
Green pedestrian
Outside Diameter: 215mm | (200mm ± 10% according to regulations).
Materials used in the enclosure
Lens: Flat lens transparent polycarbonate with protection against UV rays. Impact resistance IR3.
Board: Solid Polymer EP501.
Housing: ABS.
Gland: Polyamide.
Cable insulation: PVC.
Electrical characteristics
Vn: 230VaC | 42Vac.
In: 30mA | 115mA.
Frequency: 50/60 HZ.
F.P.: >0,9.
Power: 6,5W.
Optical characteristics
Light intensity distribution: W (wide beam EN12368/2008).
Illuminance (reference axis): 4000mcd.
Color led: 505nm (wavelength).
According to European standard EN12368 / 2008
100mm LED TRAFFIC LIGHT BODY with visor and option without visor
More info – 100mm LED TRAFFIC LIGHT BODY with visor and option without visor
Toll Traffic Light
- 2 LED Red-Green Traffic Light with 200mm diameter.
- Mounted on a column, suitable for toll barriers.
- Includes Amber LED warning light.
- Includes enamel-coated steel bell acoustic warning: 106Db +/- at 3m.
- Operating Temperature: -40ºC to +60ºC.
- Body: Lexan G.E UV Polycarbonate.
- Colors: Yellow Ral 1003, Gray Ral 7032, Black Ral 9005, Green Ral 6009.
- Voltage: 230V 50Hz.
- EN12368. CE certified.
Download datasheet
Pictograms Led Traffic Light
200mm optics can include the desired pictogram.
Solar traffic lights
Solar traffic lights with LED technology for road and urban lighting. They are ecological ones that use solar lighting for a retroactive charge, obtaining a renewable energy.
More info – Solar traffic lights
Traffic Lights Tram
Triangle LED Traffic Light Optic for Tram – ML-ST-TRVTR
More info – Traffic Lights Tram
Push button Traffic
More info – Push button Traffic
Push button Traffic CONTACTLESS
More info – Push button Traffic CONTACTLESS
This website uses cookies to improve your experience while you navigate through the website. But opting out of some of these cookies may affect your browsing experience.
Cookie settingsREJECTACCEPT
